Siemens SINUMERIK 802D sl Manuel de l'opérateur télécharger pdf (Page 36)

Overview of alarms 06/2009

NCK alarms

2-36

SINUMERIK 802D sl, Diagnostics Manual, 06/2009

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

6550 Too many subdirectories

Definitions: The number of subdirectories in a directory of the NCK has reached the maximum limit.

Reaction: Alarm display.

Remedy: Please inform the authorized personnel/service department.

- Delete or empty subdirectories in the respective directory, or

- Increase MD18270 $MN_MM_NUM_SUBDIR_PER_DIR.

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

6560 Data format not allowed

Definitions: An attempt was made to write impermissible data in an NCK file. This error can occur in particular

when the attempt was made to load binary data in the NCK as ASCII file.

The error can also occur during preprocessing of cycles (see MD10700

$MN_PREPROCESSING_LEVEL) if the NC block is very long. In this case, subdivide the NC block.

Reaction: Alarm display.

Remedy: Specify that the file concerned is a binary file (e.g. extension: .BIN).

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

6570 NC memory full

Definitions: The NC card file system of the NCK is full. The task cannot be executed. Too many system files were

created in the DRAM.

Reaction: Alarm display.

Remedy: Start fewer "execute from external" processes.

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

6580 NC memory full

Definitions: The NC card file system of the NCK is full. The task cannot be executed. To many files have been

loaded

Reaction: Alarm display.

Remedy: Delete or empty files (e.g. part programs).

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

6600 NC card memory is full

Definitions: The NC card file system of the NCK is full. No more data can be stored on the NC card.

Reaction: Alarm display.

Remedy: Delete the data on the NC card.

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

6610 Too many files open on NC card

Definitions: Too many files are being accessed simultaneously on the NC card.

Reaction: Alarm display.

Remedy: Repeat the action later.

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

6620 NC card has incorrect format

Definitions: The NC card cannot be accessed because the format is incorrect.

Reaction: Alarm display.

Remedy: Replace the NC card.

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 339 340

Commentaires sur ces manuels

Pas de commentaire

Siemens SINUMERIK 802D sl Manuel de l'opérateur Page 36

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Siemens SINUMERIK 802D sl