Siemens SINUMERIK 802D sl Manuel de l'opérateur télécharger pdf (Page 280)

Overview of alarms 06/2009

Drive alarms

2-280

SINUMERIK 802D sl, Diagnostics Manual, 06/2009

Alarm display.

Remedy: If the error occurred during power-up, i.e. it is probably connected to a drive boot file, delete all boot

files and load them back into the control from the back-up copy.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

300412 Error when storing a file (%1, %2)

Parameters: %1 = Error code 1

%2 = Error code 2

Definitions: An attempt to save a data block, e.g. the result of a measuring function, in the file system has failed.

Reaction: Interface signals are set.

Alarm display.

Remedy: Please inform the authorized personnel/service department. Create more space in the file system. It

is normally sufficient to delete 2 NC programs or to free 4 - 8 Kbytes of memory. If these remedies do

not work, it will be necessary to increase the number of files per directory or the size of the file system

itself. To do so, proceed as follows:

- Save all data

- Change settings of machine data

- 18280 $MM_NUM_FILES_PER_DIR

- 18320 $MM_NUM_FILES_IN_FILESYSTEM

- 18350 $MM_USER_FILE_MEM_MINIMUM

- and, if necessary, of

- 18270 $MM_NUM_SUBDIR_PER_DIR

- 18310 $MM_NUM_DIR_IN_FILESYSTEM

- Power On

- Reload saved data

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

300413 Error when reading a file (%1, %2)

Parameters: %1 = Error code 1

%2 = Error code 2

Definitions: An attempt to read a data block, e.g. a drive boot file, from the file system has failed. The data block

or the file system is damaged.

Reaction: Interface signals are set.

Alarm display.

Remedy: If the error occurred during power-up, i.e. it is probably connected to a drive boot file, delete all boot

files and load them back into the control from the back-up copy.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

300423 Measuring result could not be read (%1)

Parameters: %1 = Error code

Definitions: An attempt to read a measurement result has failed:

- Error code = 4: Not enough space for test result

- Error code = 16: Measurement not yet finished

Reaction: Interface signals are set.

Alarm display.

Remedy: Repeat measurement. Alter measuring time if necessary.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

1 2 ... 275 276 277 278 279 280 281 282 283 284 285 ... 339 340

Commentaires sur ces manuels

Pas de commentaire

Siemens SINUMERIK 802D sl Manuel de l'opérateur Page 280

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Siemens SINUMERIK 802D sl