Siemens SINUMERIK 802D sl Manuel de l'opérateur télécharger pdf (Page 210)

Overview of alarms 06/2009

Cycle alarms

2-210

SINUMERIK 802D sl, Diagnostics Manual, 06/2009

61181 [Channel %1: ] Block %2: Insufficient NCK software version

(TOOLCARRIER functionality missing)

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Swivelling is not possible with the current NCK software version. Alarm triggered by following cycles:

CYCLE800.

Remedy: Upgrade NCK software; functionality TOOLCARRIER available in NCU 6.3xx and higher.

61182 [Channel %1: ] Block %2: Name of swivel data record unknown

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: the specified name of the swivel data block is unknown. Alarm triggered by following cycles:

CYCLE800.

Remedy: Check the name of the swivel data block.

61183 [Channel %1: ] Block %2: Clearance mode _FR outside of value range

0..2.

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: The retraction mode value lies outside of the valid range. Alarm triggered by following cycles:

CYCLE800.

Remedy: Check installation and start-up of swivel cycle CYCLE800 -> retraction

parameter _FR.

61184 [Channel %1: ] Block %2: No solution possible with current input angle

values

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: The surface defined via the input angle cannot be processed with the machine. Alarm triggered by

following cycles: CYCLE800.

Remedy: -Check the angle entered for the swiveling of the machining plane.

-Parameter _MODE coding incorrect, e.g. rotation axis-wise YXY

61185 [Channel %1: ] Block %2: no or wrong (min > max) angle areas of rotary

axes agreed

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: The rotary axis angle range is invalild. Alarm triggered by following cycles: CYCLE800.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Check installation and start-up of the swivel cycle CYCLE800.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61186 [Channel %1: ] Block %2: Invalid rotary axis vectors --> Start-up check

swivel cycle CYCLE800

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: No or incorrect entry for rotary axis vector V1 or V2. Alarm triggered by following cycles: CYCLE800.

Remedy: Check installation and start-up of the swivel cycle CYCLE800.

Check rotary axis vectors V1 and V2.

1 2 ... 205 206 207 208 209 210 211 212 213 214 215 ... 339 340

Commentaires sur ces manuels

Pas de commentaire

Siemens SINUMERIK 802D sl Manuel de l'opérateur Page 210

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Siemens SINUMERIK 802D sl