Siemens SINUMERIK 802D sl Manuel de l'opérateur télécharger pdf (Page 258)

Overview of alarms 06/2009

Cycle alarms

2-258

SINUMERIK 802D sl, Diagnostics Manual, 06/2009

Remedy: --

61731 [Channel %1: ] Block %2: Internal error: floating point exception

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Alarm triggered by following cycle: CYCLE950.

Remedy: --

61732 [Channel %1: ] Block %2: Internal error: invalid instruction

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Alarm triggered by following cycle: CYCLE950.

Remedy: --

61733 [Channel %1: ] Block %2: Internal error: Floating_Point_Error

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Alarm triggered by following cycle: CYCLE950.

Remedy: --

61734 [Channel %1: ] Block %2: Cutting edge not compatible with cutting

direction

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Alarm triggered by following cycle: CYCLE950.

Remedy: --

61735 [Channel %1: ] Block %2: Finished part not within blank contour

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Alarm triggered by following cycle: CYCLE950.

Remedy: Check blank contour definition.

61736 [Channel %1: ] Block %2: Insert length of tool < machining depth

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Alarm triggered by following cycle: CYCLE950.

Remedy: --

61737 [Channel %1: ] Block %2: Machining_cutting_depth > tool nose radius

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Alarm triggered by following cycle: CYCLE950.

Remedy: --

61738 [Channel %1: ] Block %2: Machining_cutting_depth < tool nose radius

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Alarm triggered by following cycle: CYCLE950.

Remedy: --

61739 [Channel %1: ] Block %2: Wrong insert position of tool for this machining

operation

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Alarm triggered by following cycle: CYCLE950.

Remedy: --

1 2 ... 253 254 255 256 257 258 259 260 261 262 263 ... 339 340

Commentaires sur ces manuels

Pas de commentaire

Siemens SINUMERIK 802D sl Manuel de l'opérateur Page 258

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Siemens SINUMERIK 802D sl