Siemens SINUMERIK 802D sl Manuel de l'opérateur télécharger pdf (Page 271)

Cycle alarms

06/2009 Overview of alarms

2-271

SINUMERIK 802D sl, Diagnostics Manual, 06/2009

62306 [Channel %1: ] Block %2: Permissible measuring difference exceeded

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm is triggerd by the following cycles: CYCLE971, CYCLE972, CYCLE974, CYCLE977,

CYCLE978, CYCLE979, CYCLE982, CYCLE994

Remedy: The difference between actual and setpoint value is larger than tolerance parameter _TDIF, tool data

are not corrected.

62307 [Channel %1: ] Block %2: Maximum number of characters per line

exceeded.

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm is triggerd by the following cycles: CYCLE105

Insufficient number of characters per line.

Remedy: Increase the value in _PROTFORM[1]

62308 [Channel %1: ] Block %2: Variable column width not possible

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm is triggerd by the following cycles: CYCLE105.

Unable to generate variable column widths, as no header available.

A fixed column width of 12 characters is used.

Reaction: Alarm display.

Remedy: Complete the header in _PROTVAL[0].

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

62309 [Channel %1: ] Block %2: Insufficient column width

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm is triggerd by the following cycles: CYCLE105.

The value to be logged is larger than the column width.

Reaction: Alarm display.

Remedy: Adjust _PROTFORM[5] or change the header at variable column width.

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

62310 [Channel %1: ] Block %2: The max. number of characters per line is

limited to 200 characters per line

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: Alarm triggered by following cycles: CYCLE105.

The maximum number of characters per line has been limited to 200 characters per line.

Remedy: --

62311 [Channel %1: ] Block %2: The maximum number of characters per line

_PROTFORM[1] is adjusted.

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm is triggered by the following cycles: CYCLE105

Max. number of characters per line _PROTFORM[1] has been adjusted.

Reaction: Alarm display.

Remedy: --

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

1 2 ... 266 267 268 269 270 271 272 273 274 275 276 ... 339 340

Commentaires sur ces manuels

Pas de commentaire

Siemens SINUMERIK 802D sl Manuel de l'opérateur Page 271

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Siemens SINUMERIK 802D sl