Siemens SINUMERIK 802D sl Manuel de l'opérateur télécharger pdf (Page 123)

NCK alarms

06/2009 Overview of alarms

2-123

SINUMERIK 802D sl, Diagnostics Manual, 06/2009

- Definition of LUDs in incorrect subroutine level

- Transferred circle coordinates

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Modify part program.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

15810 [Channel %1: ] Block %2 wrong array dimension for

CONTPRON/CONTDCON

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: The number of columns for the array created for CONTPRON/CONTDCON does not conform to the

current programming guide.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Modify part program.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

15900 [Channel %1: ] Block %2 touch probe not allowed

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Measure with deletion of distance-to-go

In the part program, an illegal probe has been programmed with the command MEAS (measure with

deletion of distance-to-go). The probe numbers

0 ... no probe

1 ... probe 1

2 ... probe 2

are allowed, whether the probe is actually connected or not.

Example:

N10 MEAS=2 G01 X100 Y200 Z300 F1000

Probe 2 with deletion of distance-to-go

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Include a probe number within the limits given above in the keyword MEAS=... This must correspond

to the hardware connection of the probe.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

15910 [Channel %1: ] Block %2 touch probe not allowed

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Measure without deletion of distance-to-go

In the part program, an illegal probe has been programmed with the command MEAW (measure with-

out distance-to-go). The probe numbers

0 ... no probe

1 ... probe 1

2 ... probe 2

are allowed, whether the probe is actually connected or not.

Example:

N10 MEAW=2 G01 X100 Y200 Z300 F1000

Probe 2 without deletion of distance-to-go

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 339 340

Commentaires sur ces manuels

Pas de commentaire

Siemens SINUMERIK 802D sl Manuel de l'opérateur Page 123

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Siemens SINUMERIK 802D sl