Siemens SINUMERIK 802D sl Manuel de l'opérateur télécharger pdf (Page 273)

Cycle alarms

06/2009 Overview of alarms

2-273

SINUMERIK 802D sl, Diagnostics Manual, 06/2009

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

62501 [Channel %1: ] Block %2: Speed has been limited

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following grinding cycle: CYCLE446

Remedy: Check speed and program a lower value in the NC program if necessary

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

62502 [Channel %1: ] Block %2: Dresser %4, GWPS has been limited

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following grinding cycle: CYCLE421

Remedy: Check limit value for GWPS and program a lower value in the NC program if necessary

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

62503 [Channel %1: ] Block %2: Dresser %4, speed has been limited

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following grinding cycle: CYCLE421

Remedy: Check speed and program a lower value in the NC program if necessary

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

62900 [Channel %1: ] Block %2: Incorrect source file

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions:

Reaction: Alarm display.

Remedy: --

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

62901 [Channel %1: ] Block %2: Source file not available

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions:

Reaction: Alarm display.

Remedy: --

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

62902 [Channel %1: ] Block %2: Not yet implemented

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions:

Reaction: Alarm display.

Remedy: --

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

62903 [Channel %1: ] Block %2: Incorrect contour

Parameters: %1 = Channel number

%2 = Block number, label channel number

1 2 ... 268 269 270 271 272 273 274 275 276 277 278 ... 339 340

Commentaires sur ces manuels

Pas de commentaire

Siemens SINUMERIK 802D sl Manuel de l'opérateur Page 273

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Siemens SINUMERIK 802D sl