Siemens SINUMERIK 802D sl Spécifications télécharger pdf (Page 41)

NCK alarms/ISO alarms

06/2007 Overview of alarms

2-41

SINUMERIK 802D sl, Diagnostics Manual, 06/2007Edition

Error number = 2 shows that this value is too small

MD 18180 MM_NUM_MAX_FUNC_PARAM = max. number of all

parameters defined in the cycle programs

Error number = 2 shows that this value is too small

(If this MD is modified, the memory backup is retained)

The following applies to macro definitions:

MD 18160 MM_NUM_USER_MACROS = max. number of all

Macro definitions

Error number = 2 shows that this value is too small

(If this MD is modified, the memory backup is retained)

The following applies to GUD variables:

MD 18118 MM_NUM_GUD_MODULES = max. number of all

GUD data blocks per area (NC/channel)

(if GD1, GD2, GD3, GD9 are defined, the value must be 9

MD 4 MM_NUM_ GUD_NAMES_NCK = max. number of all

global GUD variables

Error number = 2 shows that this value is too small

MD 18130 MM_NUM_GUD_NAMES_CHAN = max. number of all

Channel-specific GUD variables in the channel

Error number = 2 shows that this value is too small

MD 18150 MM_GUD_VALUES_MEM = max. memory values

all GUD variables together

Error number = 1 shows that this value is too small

Switch the control OFF - ON.

Program Con-

tinuation:

Switch control OFF - ON.

6020 Machine data have been changed - now memory is reorganized

Definitions: Machine data have been changed that define the NC user memory allocation. Data management has

restructured the memory in accordance with the altered machine data.

Reaction: Alarm display.

Remedy: No remedial action is required. Any user data that are required must be input again.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

6030 Limit of user memory has been adapted

Definitions: Data management checks during power-up the actually available physical user memory (DRAM,

DPRAM and SRAM) with the values in the system-specific machine data 18210

MM_USER_MEM_DYNAMIC, MD 18220 MM_USER_MEM_DPR and

MD 18230 MM_USERMEM_BUFFERED.

Reaction: Alarm display.

Remedy: No remedial action is required. The new maximum permissible value can be read from the reduced

machine data.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

6035 Instead of %1 KB the system has only %2 KB of free user memory of type

'%3'

Parameters: %1 = free memory defined for the control model in KB

%2 = actual maximum amount of free memory in KB

%3 = type of memory, "D" = non-buffered, "S" = buffered

Definitions: The alarm can only occur after a 'cold start' (=NCK start-up with standard machine data). The alarm

is only a notice. There is no interference with any NCK functions. It shows that the NCK has less free

user memory available than specified by Siemens for this control variant. The value of the actually

available free user memory can also be taken from the machine data 18050

INFO_FREE_MEM_DYNAMIC, 18060 INFO_FREE_MEMS_STATIC.

Siemens supplies NCK with default settings that, depending on the model, have certain (free) memory

space available for the specific settings of the actual applications. The original factory setting of NCK

systems is thus that the alarm does not occur with a cold start.

Reaction: Alarm display.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 391 392

Commentaires sur ces manuels

Pas de commentaire

Siemens SINUMERIK 802D sl Spécifications Page 41

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Siemens SINUMERIK 802D sl