Siemens SINUMERIK 802D sl Spécifications télécharger pdf (Page 144)

Overview of alarms 06/2007

NCK alarms/ISO alarms

2-144

SINUMERIK 802D sl, Diagnostics Manual, 06/2007Edition

14752 Channel %1 block %2 DELDTG | STOPREOF conflict

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: In a block of motion synchronous actions referring to a motion block, both DELDTG (delete distance-

to-go) and STOPREOF (preprocessing stop) have been programmed.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: The functions DELDTG and STOPREOF exclude each other in a block.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

14753 Channel %1 block %2 motion synchronous actions with illegal

interpolation type

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: The active interpolation type (e.g. 5-axis interpolation) is not allowed for the motion synchronous

action or for the function "Several feeds".

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Modify part program.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

14754 Channel %1 block %2 motion synchronous actions and wrong feed type

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: The active feed type is not allowed for the motion synchronous action or for the function "Several

feeds".

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Modify part program.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

14755 Channel %1 block %2 motion synchronous actions without traverse

motion

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: The programmed motion synchronous action and the function "Several feeds" require a traversing

motion or the value of the traversing motion is 0.

This alarm is no longer used after P3.2.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Modify part program.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

14756 Channel %1 block %2 motion synchronous action and wrong value

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Value of the synchronous action or the function "Several feeds" is not allowed.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Modify part program. Check whether a negative value was entered for a synchronous action.

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 391 392

Siemens SINUMERIK 802D sl Spécifications Page 144

Commentaires sur ces manuels

Siemens SINUMERIK 802D sl Spécifications Page 144

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Siemens SINUMERIK 802D sl