Siemens SINUMERIK 802D sl Spécifications télécharger pdf (Page 168)

Overview of alarms 06/2007

NCK alarms/ISO alarms

2-168

SINUMERIK 802D sl, Diagnostics Manual, 06/2007Edition

Program Con-

tinuation:

Clear alarm with the RESET key in all channels. Restart part program.

16678 Channel %1 block %2 following axis/spindle %3 status %4 impermissible

traversing instruction

Parameters: %1 = Channel number

%2 = Block number, label

%3 = Axis name, spindle number

%4 = Status

Definitions: An addtional traversing in the following axis/spindle is not permitted in the current status

of the generic coupling.

Example: CPOF=X G0 X100 is not permitted.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Modify part program.

A motion in the following axis/spindle can be programmed with CPFPOS, CPON or CPOF

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

16680 Channel %1 block %2 following axis/spindle %4 instruction %3

programmed repeatedly

Parameters: %1 = Channel number

%2 = Block number, label

%3 = CP instruction

%4 = Axis name, spindle number

Definitions: The stated instruction has been programmed repeatedly in the block for the same following

axis/spindle of a generic coupling.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Modify part program.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

16682 Channel %1 block %2 following axis/spindle %3 instructions %4 are not

possible.

Parameters: %1 = Channel number

%2 = Block number, label

%3 = Axis name, spindle number

%4 = CP instruction

Definitions: The stated instructions are not permitted together in one block for a following axis/spindle of a generic

coupling.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Modify part program.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

16684 Channel %1 block %2 following axis/spindle %3 instructions %4 are not

possible separately.

Parameters: %1 = Channel number

%2 = Block number, label

%3 = Axis name, spindle number

%4 = CP instructions

1 2 ... 163 164 165 166 167 168 169 170 171 172 173 ... 391 392

Commentaires sur ces manuels

Pas de commentaire

Siemens SINUMERIK 802D sl Spécifications Page 168

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Siemens SINUMERIK 802D sl