Siemens SINUMERIK 802D sl Spécifications télécharger pdf (Page 306)

Overview of alarms 06/2007

Cycle alarms

2-306

SINUMERIK 802D sl, Diagnostics Manual, 06/2007 Edition

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61321 Channel %1 Block %2: Check WO memory number

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: WO with the number specified in _KNUM not existing. Alarm is triggered: CYCLE974, CYCLE977,

CYCLE978, CYCLE979, CYCLE994, CYCLE998.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Check parameter _KNUM.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61337 Channel %1 Block %2: Check measuring input

Parameters: %1 = Channel number

%2 = Block number, label

Definitions:

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy:

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61346 Channel %1 Block %2: Distance starting point/measuring point _SETV[0]

and _SETV[1] <=0

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm is triggerd by the following cycles: CYCLE961.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Parameters _SETV[0] or _SETV[1] are empty or smaller than 0.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61348 Channel %1 Block %2: Angle rel. to reference edge equals 0

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions:

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy:

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

1 2 ... 301 302 303 304 305 306 307 308 309 310 311 ... 391 392

Commentaires sur ces manuels

Pas de commentaire

Siemens SINUMERIK 802D sl Spécifications Page 306

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Siemens SINUMERIK 802D sl