Siemens SINUMERIK 802D sl Spécifications télécharger pdf (Page 102)

Overview of alarms 06/2007

NCK alarms/ISO alarms

2-102

SINUMERIK 802D sl, Diagnostics Manual, 06/2007Edition

Definitions: The displayed vocabulary word may not be used in this type of block and at this location (all files in

the NC are designated as blocks).

Block types:

Program block

Contains a main program or subroutine

Data Block

Contains macro or variable definitions and possibly an M, H or E function

Initialization block

Contains only selected language elements for the data initialization

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Press the NC Stop key and select the function "Correction block" with the softkey PROGRAM COR-

RECT. The correction pointer positions on the incorrect block.

Remove the displayed language elements (vocabulary word) with its parameters from this block and

insert in the block provided for this purpose.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

12510 Channel %1 block %2 too many machine data %3

Parameters: %1 = Channel number

%2 = Block number, label

%3 = Source symbol

Definitions: In the part program, in the machine data file (..._TEA) and in the initialization file (..._INI), no more than

2 machine data may be used per block.

Example:

N ...

N 100 $MN_OVR_FACTOR_FEEDRATE [10] = 15,

$MN_OVR_FACTOR_FEEDRATE [11] = 20

N ...

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Press the NC Stop key and select the function "Correction block" with the softkey PROGRAM COR-

RECT. The correction pointer positions on the incorrect block.

Divide up the part program block into several blocks.

If necessary, use the local variable for storing intermediate results.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

12520 Channel %1 block %2 too many tool parameters %3

Parameters: %1 = Channel number

%2 = Block number, label

%3 = Source symbol

Definitions: In the part program, in the tool offset file (..._TOA) and in the initialization file (..._INI), no more than 5

tool offset parameters may be used per block.

Example:

N ...

N 100$TC_DP1 [5,1] = 130, $TC_DP3 [5,1] = 150.123,

$TC_DP4 [5,1] = 223.4, $TC_DP5 [5,1] = 200.12,

$TC_DP6 [5,1] = 55.02

N ...

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Press the NC Stop key and select the function "Correction block" with the softkey PROGRAM COR-

RECT. The correction pointer positions on the incorrect block.

Divide up the part program block into several blocks.

If necessary, use the local variable for storing intermediate results.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 391 392

Siemens SINUMERIK 802D sl Spécifications Page 102

Commentaires sur ces manuels

Siemens SINUMERIK 802D sl Spécifications Page 102

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Siemens SINUMERIK 802D sl