Siemens SINUMERIK 802D sl Spécifications télécharger pdf (Page 176)

Overview of alarms 06/2007

NCK alarms/ISO alarms

2-176

SINUMERIK 802D sl, Diagnostics Manual, 06/2007Edition

16757 Channel %1 block %2 for following spindle %3 coupling as leading

spindle/axis already existing

Parameters: %1 = Channel number

%2 = Block number, label

%3 = Following spindle number

Definitions: A coupling has been switched on in which the following spindle/axis has already been active as lead-

ing spindle/axis in another coupling. Chained couplings cannot be processed.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Check in the parts program whether the following spindle/axis is already active as leading spindle/axis

in another coupling.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

16758 Channel %1 block %2 for leading spindle %3 coupling as following

spindle/axis already existing

Parameters: %1 = Channel number

%2 = Block number, label

%3 = Leading spindle number

Definitions: A coupling has been switched on in which the leading spindle/axis has already been active as follow-

ing spindle/axis in another coupling. Chained couplings cannot be processed.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Check in the parts program whether the leading spindle/axis is already active as following spindle/axis

in another coupling.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

16760 Channel %1 block %2 axis %3 S value missing

Parameters: %1 = channel number

%2 = block number, label

%3 = axis name, spindle number

Definitions: No spindle speed has been given for rigid tapping (G331 or G332).

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Program the spindle speed under address S in [rpm] (in spite of axis mode); the direction of rotation

is indicated by the sign of the spindle lead.

Positive thread lead:Rotational direction as M03

Negative thread lead:Rotational direction as M04

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

16762 Channel %1 block %2 spindle %3 thread function is active

Parameters: %1 = channel number

%2 = block number, label

%3 = spindle number

Definitions: Programming error:

The spindle function cannot be executed at the moment.

This alarm occurs when the spindle is linked with the axes by an interpolation function.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Modify part program. Deselect thread cutting or tapping.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

1 2 ... 171 172 173 174 175 176 177 178 179 180 181 ... 391 392

Siemens SINUMERIK 802D sl Spécifications Page 176

Commentaires sur ces manuels

Siemens SINUMERIK 802D sl Spécifications Page 176

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Siemens SINUMERIK 802D sl