Siemens SIMATIC NET Spécifications télécharger pdf (Page 89)

Chapter 6. Hardware Setup 79

Exporting a S_7 6.x Driver Configuration

If you are upgrading from the S_7 6.x driver, you can export your 6.x driver

configuration and import it into the SI7 driver.

To export your S_7 6.x configuration:

[1] Open your 6.x driver configuration.

[2] Select Save As from the File menu to export it.

[3] Select Text Files (*.CSV files) as the file type and click OK.

Once the driver configuration is created, shut down the 6.x driver.

Importing an S_7 6.x Driver Configuration into the SI7 Power

Tool

Once you export your 6.x S_7 driver configuration, you can import it into the SI7

Power Tool. Using this method of configuring the SI7 driver saves time and

preserves your existing configuration.

To import your S_7 6.x driver configuration:

[1] Start the SI7 Power Tool.

[2] Select New from the File menu and save any driver configuration that

automatically loads on startup.

[3] Select Open from the File menu. The Open dialog box appears.

[4] Select Text Files (*.CSV files) as the file type and click Open. The Power

Tool reads your 6.x driver configuration and displays the text:

path\filename.csv is in a S_7 6.x CSV format. Do you

wish to import it?

[5] Click OK to import the driver configuration into the Power Tool and proceed

to step 6. Click Cancel to abort the procedure.

[6] Select Save from the File menu to save the driver configuration in SI7 format.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 267 268

Pas de commentaire

Siemens SIMATIC NET Spécifications Page 89