Siemens SIMATIC NET Spécifications télécharger pdf (Page 206)

196 Siemens Simatic S7 Driver Online Help

To start the I/O driver from the I/O Driver Power Tool

[1] Specify a default path and configuration file name for the driver:

[a] Select Setup from the Options menu. The Setup dialog box appears.

[b] Select the Default Path tab.

[c] Enter the configuration file’s default name and default path in the fields

provided.

[2] Configure your channels, devices, and datablocks. Select the Enable check

box for each channel, device, and datablock you want to start.

[3] Select Start from the Display Mode menu. The driver starts running and

processes all enabled channels, devices, and datablocks.

If you want to start the driver automatically, you should also turn on the Auto Start

option.

To start the I/O driver automatically with the Auto Start option

[1] Select Setup from the Options menu. The Setup dialog box appears.

[2] Select the Advanced tab in the Setup dialog box.

[3] Click the Auto Start On option button from the Server area.

See Also

Stopping the I/O Driver | Starting the I/O Driver from the SCU | Setting the I/O Driver

for Automatic Startup in FIX/iFIX | Starting the I/O Driver Manually from Mission

Control

Starting the I/O Driver from the SCU

IMPORTANT: You must install the SI7 driver in your root FIX or iFIX directory to

start it from the SCU. If you have not installed the driver in this directory, uninstall it

and then re-install it in the proper path.

1 2 ... 201 202 203 204 205 206 207 208 209 210 211 ... 267 268

Pas de commentaire

Siemens SIMATIC NET Spécifications Page 206