Siemens SIMATIC NET Spécifications télécharger pdf (Page 219)

Chapter 12. Checking Communication 209

[3] Select Analog Input from the dialog box that appears and click OK.

[4] Enter a name for the database block and enter SI7 in the Device field.

[5] Enter TESTPOINT:M15 in the I/O Address field.

TESTPOINT is the device name you entered in the Power Tool, and M15 is

the address of the datablock you created.

[6] Select OK and return to the Intellution WorkSpace.

[7] Click the Data Link button, shown below, on the Toolbox. The cursor

changes to a plus sign.

[8] Click and drag the mouse to draw the data link on the screen. Release the

mouse when you are finished. The Datalink dialog box appears.

[9] Enter a tagname that references the datablock you created. For example, if

your SCADA server is SCADA1 and the block’s name is AI1 you would enter

the tagname SCADA1:AI1.F_CV.

[10] Select In-Place from the Type field in the Data Entry area of the dialog box.

[11] Click OK to create the data link.

[12] Select Switch to Run from the WorkSpace menu to preview the link. Data

from the hardware appears in the link. If it does not, refer to the

Troubleshooting section.

Pas de commentaire

Siemens SIMATIC NET Spécifications Page 219