Siemens SIMATIC NET Spécifications télécharger pdf (Page 117)

Chapter 7. Sample Configurations 107

To configure your local computer to communicate with SIMATIC NET v6.0

[1] Program your PLC with Step 7. Save your Step 7 project files. You will need

them later.

[2] Use the Commissioning Wizard to set up your communication processors

(interface cards) and the OPC server.

[3] Use the HW Config-PC Station program to configure the virtual field devices

and modify any communication processors you created.

[4] Save and compile your settings to create a hardware configuration for the

computer you are configuring.

[5] Use the Station Configuration Editor to map the hardware configuration you

create to the destination computer.

NOTE: The module names and indexes in the hardware configuration must

match the names and indexes in the Station Configuration Editor.

[6] Download the hardware configuration to the destination computer.

[7] Use the Configuration Console to define the access points and interface

(network) assignments you need.

[8] Use the Simatic Manager to merge Step 7 projects into your current hardware

configuration and configure the network.

[9] Save and compile the configuration.

[10] Download the resulting file to the computer you are configuring.

For more information on these steps, refer to the Siemens manual Configuring PC

Stations with SIMATIC NCM PC or contact Siemens support at 1-800-964-4114

(Monday through Friday during regular business hours).

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 267 268

Pas de commentaire

Siemens SIMATIC NET Spécifications Page 117