Siemens SIMATIC NET Spécifications télécharger pdf (Page 59)

Chapter 5. About the SI7 I/O Driver 49

Refer to the following topics for a description of the Power Tool and how to use it to

configure your driver:

• About the SI7 I/O Driver

• Setting Up the SI7 I/O Server Connection

• Adding and Modifying Channels

• Adding and Modifying Devices

• Adding and Modifying Datablocks

Feature: Remote Control and Configuration

You can control and configure the SI7 I/O Server remotely using the Power Tool or

any other client application. To set up remote control of the I/O Server, you can

install the Power Tool or your client application on a computer that does not have the

server software installed. However, you must install the I/O Server on the computer

used to communicate with the process hardware. The following graphic shows where

to install software when communicating remotely to the I/O Server:

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 267 268

Pas de commentaire

Siemens SIMATIC NET Spécifications Page 59