Siemens SIMATIC NET Spécifications télécharger pdf (Page 243)

Chapter 14. Troubleshooting 233

[3] Specify a default path and configuration file name for the driver:

[a] Select Setup from the Options menu. The Setup dialog box appears.

[b] Select the Default Path tab.

[c] Enter the configuration file’s default name and default path in the fields

provided.

To start the System Configuration Utility (SCU) and verify it is configured correctly

[1] Select SCADA from the Configure menu. The SCADA Configuration dialog

box appears. You should see the following text in the Configured Drivers list

box:

SI7 – Siemens Simatic S7 v7.20

[2] If you do not see this text, Select the ? button next to the I/O Driver Name

field.

[3] Select the SI7 driver from the dialog box and click OK.

[4] Click Add to add the selected I/O driver to the Configured I/O Drivers list box.

[5] Click OK again to close the SCADA Configuration dialog box.

[6] Select Tasks from the Configure menu. When the Task Configuration dialog

box appears, you should see IOCNTRL.EXE /a listed in the Configured Tasks

list box.

[7] If you do not see this text, enter the Base path and IOCNTRL.EXE /a in the

Filename field.

[8] Click OK to save your changes and save your SCU configuration.

[9] Restart FIX or iFIX. The driver should automatically start.

Pas de commentaire

Siemens SIMATIC NET Spécifications Page 243