Siemens Pacemaker UM344-2 Manuel d'utilisateur télécharger pdf (Page 80)

ON-LINE AND OFF-LINE OPERATION UM344-2

September 1995

3. Press EDIT (F1) to edit the Power-Up Valve setting. Press

ENTER (F4) to change the setting, press QUIT (F3) to exit

without changing the setting. Press SEL/CONT (F4) to

return to the Function Block menu.

5.1.1.8 Controller Block

The controller function block provides an extensive range of

Proportional-Integral-Derivative functions including PID, PD and

ID. For more detailed descriptions of these controller functions

refer to the appendix.

1. At the CONTROLLER BLOCK Screen press SELECT

(F4) .

2. Press NEXT OPTN (F2) to turn the controller function ON

or OFF.

3. Press SEL/CONT (F4) to configure the Controller

Parameters or SEL/END (F3) to return to the Function

Block menu.

4. At the CONTROLLER TYPE screen use LAST OPTN

(F1) and NEXT OPTN (F2) to scroll through the PID, PD,

ID options. Press SEL/CONT (F4) for the controller

ACTION screen.

5. Press NEXT OPTN (F2) to select either a DIRECT or

REVERSE acting controller. Press SEL/CONT (F4) to

continue to the Proportional Gain, Time-Integral, Time

Derivative, Derivative Gain, and Manual Reset blocks.

6. Press EDIT (F1) to edit a parameter. Press ENTER (F4) to

change a parameter or QUIT (F3) to exit without changing

the parameter.

7. Press SEL/CONT (F4) for the MANUAL RESET TRACK

screen. Press NEXT OPTN (F2) to select YES or NO.

8. Press SEL/CONT (F4) to return to the Function Block

Menu. This completes configuration.

5.1.1.9 End or Review

Configuration

SEL/

END

SEL/

CONT

EDIT

POWER-UP VALVE:

0.000%

CONTROLLER TYPE: PID

LAST

OPTN

SEL/

END

SEL/

CONT

LAST

OPTN

SEL/

END

SEL/

CONT

ACTION: REVERSE

SEL/

END

SEL/

CONT

EDIT

PROPORTIONAL GAIN:

1.0000

CONTROLLER: ON

LAST

OPTN

SEL/

END

SEL/

CONT

SEL/

END

SEL/

CONT

LAST

OPTN

MANUAL RESET TRACK:

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 182 183

Commentaires sur ces manuels

Pas de commentaire

Siemens Pacemaker UM344-2 Manuel d'utilisateur Page 80

Commentaires sur ces manuels

Produits connexes et manuels pour Mesure, test et contrôle Siemens Pacemaker UM344-2