Siemens Pacemaker UM344-2 Manuel d'utilisateur télécharger pdf (Page 35)

UM344-2 INSTALLATION

September 1995

4.0 INSTALLATION

This Section describes installation of a Model 344 Temperature Transmitter. Topics include: receipt of

shipment, installation considerations, and mechanical and electrical installation.

IMPORTANT

The installation must conform to the National Electrical Code and all

other applicable construction and electrical codes.

Refer to the installation drawings in Appendix B when locating a

Transmitter in a hazardous area.

4.1 EQUIPMENT DELIVERY AND HANDLING

4.1.1 Factory Shipment

Prior to shipment, a Transmitter is fully tested and inspected to ensure proper operation. It is then

packaged for shipment. Most accessories are shipped separately.

4.1.2 Receipt of Shipment

Each carton should be inspected at the time of delivery for possible external damage. Any visible damage

should be immediately recorded on the carrier's copy of the delivery slip.

Each carton should be carefully unpacked and its contents checked against the enclosed packing list. At

the same time, each item should be inspected for any hidden damage that may or may not have been

accompanied by exterior carton damage.

If it is found that some items have been damaged or are missing, notify Moore Products Co. immediately

and provide full details. In addition, damages must be reported to the carrier with a request for their on-

site inspection of the damaged item and its shipping carton.

4.1.3 Storage

If a Transmitter is to be stored for a period prior to installation, review the environmental specifications in

Section 8.3.5.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 182 183

Pas de commentaire

Siemens Pacemaker UM344-2 Manuel d'utilisateur Page 35