s Industry, Inc.
Building Technologies Division
FireFinder XLS Components ─ (cont.’d)
No card cages, power supplies or bulk amplifiers can be
mounted in a given REMBOX because of their smaller
depth. However, Model PMI and modules (e.g. – the
remote network interface module [Model RNI], the
output control module [Model OCM-16], and the
supervised input module [Model SIM-16]) can be mounted
in a given REMBOX.
Due to the depth of the live voice module and the
firefighters’ master telephone, no Model OCM-16 or Model
SIM-16 modules can be used simultaneously with Model
LVM or Model FMT. The REMBOX2 and the REMBOX4 are
designed for flush mounting with no trim kit required.
Both enclosures also come with a clear lens plate on the
cover.
REMBOX2 Two Module Remote Enclosures
REMBOX2 Two Module Remote Enclosures
REMBOX2 has two (2) inner-door module spaces, and can
hold a single Model PMI, up to two (2) switch module
brackets and one (1) Model LVM. Combinations are also
allowed.
REMBOX2 can also mount a single RNI remote network
interface on a bracket included in the backbox. A bracket
called the REMBOX2-MP can be used to mount up to four
OCM-16 output control modules or SIM-16 supervised
input modules. Model REMBOX2-MP must be purchased
separately. Approximate size of REMBOX2 is 14-1/2"
(36.8cm.) wide, 18-1/2" (47cm.) high and 5" (12.7cm.)
deep.
REMBOX4 Four-Module Remote Enclosures
REMBOX4 Four-Module Remote Enclosures
Model REMBOX4 has space for mounting four (4) inner-
door modules. Any combination of Model PMI (two-
module spaces); switch module brackets; Model LVM,
or Model FMT (one-module space each) can be used.
Unused module spaces can be covered with Model ID-SP
blank plates. The REMBOX4 can also mount a single
remote network interface (Model RNI) on a bracket
included in the backbox.
A bracket known as Model REMBOX4-MP can be used
to mount up to eight (8) output control modules (Model
OCM-16) or supervised input modules (SIM-16). The
REMBOX4-MP must be purchased separately.
Approximate size of the REMBOX4 is 24" (61cm.) wide,
18-1/2" (47cm.) high and 5" (12.7cm.) deep.
NRC Network Ring Card
NRC Network Ring Card
Model NRC (FM approval pending) provides XNET, peer-to-
peer communication between FireFinder XLS systems. One
(1) Model NRC is required for each XLS panel, in order to
allow FireFinder XLS nodes to be wired in a Class A, Style 7
ring topology.
NCC-G - Network Color Graphics
NCC-G - Network Color Graphics
Model NCC-G is a PC-based, color-graphics command center
designed for use with the XNET network, and provides full
control and annunciation for a XNET network for a
maximum 63 XLS, MXL-IQ or MXL systems. The NCC-G is
used to monitor and control alarms, troubles, security,
supervisory and all system events from one of many XLS
systems.
Model NCC-G maintains an extensive history log of all
system events and has extensive report generation
capabilities. User programmable function buttons allow
site specific control functions. Multiple NCC-Gs may be
connected to XNET network. Each NCC-G ordered
separately.
MLC - MXL Line Card [for FireFinder XLS]
(12 pages)
(116 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels