Siemens FIREFINDER-XLS Spécifications télécharger pdf (Page 5)

s Industry, Inc.

Building Technologies Division

FireFinder XLS Components ─ (cont.’d)

Each Model SCM-8 switch is fully programmable, and may

be used to control speaker circuits and a wide range of

general-system functions such as: All Call, All Evac,

Warden's Page, Speaker, etc. Any number of circuits may

be grouped and controlled by a single switch. Switch

usages and zone groupings are assigned using the Zeus

system software-programming software. Model SCM-8

modules are mounted on a hinged panel, as a part of the

FireFinder XLS Command Console enclosure.

LCM-8 LED Control Module

The LED Control Module (Model LCM-8) is a FireFinder

XLS-option module that provides LED annunciation for

FireFinder XLS system activity. Each LCM-8 module

contains eight (8) groups of two (2) LEDs – each of which

can be assigned to desired outputs using the Zeus

system software-programming tool.

Eight (8) LEDs are dual-color capable (RED or GREEN /

flashing or steady). The remaining LEDs are AMBER

flashing or steady. A space is provided for labeling of LED

functions. The label slides behind a clear, protective

membrane. Model LCM-8 dimensions are identical to

Model SCM-8, and Model LCM-8 is mounted on the same

hinged panel, as a part of the FireFinder XLS Command

Console enclosure.

FCM-6 Fan, Motor, Dampers

Control Module

FCM-6 Fan, Motor, Dampers Control Module

The Fan, Motor, Dampers Control Module (Model FCM-6) is a

FireFinder XLS command-console option module that

provides manual control of building HVAC system fans,

motors, and dampers. Each Model FCM-6 module provides

six (6) sets of three (3) push-button switches for manual-

system control. Each switch has three (3), associated

LEDs to indicate Fan / Damper / Motor status: OFF (Red LED),

ON (Green LED), TROUBLE (Yellow LED).

PSC-12 Power Supply Charger Module

The Power Supply Charger Module (Model PSC-12) is a

high-current power supply that provides the FireFinder

XLS primary-regulated 24VDC power to operate. Model

PSC-12 is rated at 12Amps (Alarm) / 5Amps (Standby), and

has a built-in battery charger, capable of charging up to 100

AH batteries. Model PSC-12 is an addressable-intelligent,

microprocessor-controlled module that communicates its

status to the system-operator interface (PMI). Model PMI is

able to query the status of the power supply to obtain

information regarding system-charging current, terminal-

loading information, ground-fault conditions and more.

PTB Power Termination Board

Model PSC-12 comes packaged with a module called the

Power Termination Board (Model PTB). Model PTB is

required for operation with Model PSC-12. Model PTB filters

the power from the incoming AC mains, and distributes it

to the Model PSC-12 power supply and the optional Model

PSX-12 power-supply extender.

Model PTB has an optional connector that can be used during

system installation, commissioning and service to provide

the technician with a place to plug in their laptop PC, if

required. Model AC-ADPT is an optional accessory cable that

allows connection on one side to Model PTB, via a keyed

connector and on the other end directly into to the laptop's

transformer.

Most laptop-computer external power transformers have

removable AC power cords, which can be replaced by the

optional Model AC-ADPT to temporarily provide an AC

power source for laptop-PC usage during system

installation, service and maintenance calls when needed.

PSX-12 Power Supply Extender

The Power Supply Extender (Model PSX-12) is a high-current,

auxiliary power supply that expands the main Model PSC-12

power supply and battery charger of the FireFinder XLS

system with an additional 24VDC power. Model PSX-12

is rated at 12 Amps.

1 2 3 4 5 6 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire

Siemens FIREFINDER-XLS Spécifications Page 5

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Siemens FIREFINDER-XLS