Siemens DTU3005-B Manuel de l'opérateur Page 99
- Page / 141
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Appendix E: Device Data Format
Siemens Energy & Automation, Inc. 95
General Status Word 3
2
16 Bit Contents
6–15 Not used
5 Dist. teleprotection: Carrier faulty (Valid)
4 Dist. teleprotection: Carrier faulty (Status)
3 AR: Auto-reclose is not ready (Valid)
2 AR: Auto-reclose is not ready (Status)
1 Emergency O/C protection is running (Valid)
0 Emergency O/C protection is running (Status)
Number of last fault 17 0…32767, 0 = no faults
Fault Date/Time (ms) 18 0…59999 (ms )
Fault Date/Time (h/m) 19 High byte: HH (0…23), Low byte: MM (0…59)
Fault Date/Time (m/d) 20 High byte: MM (1…12); Low byte: DD (1…31)
Fault Date/Time (y) 21 Year: YY (00…99)
Interrupted current:
Phase L1 (I/I
n
)
22 ms since fault (-1 = no occurance)
Interrupted current:
Phase L1 (I/I
n
)
23 Low word
Interrupted current:
Phase L1 (I/I
n
)
24 High word
Interrupted current:
Phase L2 (I/I
n
)
25 ms since fault (-1 = no occurance)
Interrupted current:
Phase L2 (I/I
n
)
26 Low word
Interrupted current:
Phase L2 (I/I
n
)
27 High word
Interrupted current:
Phase L3 (I/I
n
)
28 ms since fault (-1 = no occurance)
Interrupted current:
Phase L3 (I/I
n
)
29 Low word
Interrupted current:
Phase L3 (I/I
n
)
30 High word
Fault Resistance, Ohm Prim. 31 ms since fault (-1 = no fault)
Fault Resistance, Ohm Prim. 32 Low word
Fault Resistance, Ohm Prim. 33 High word
Fault Reactance, Ohm Prim. 34 ms since fault (-1 = no fault)
Fault Reactance, Ohm Prim. 35 Low word
Fault Reactance, Ohm Prim. 36 High word
Fault Resistance, Ohm Sec. 37 ms since fault (-1 = no fault)
Fault Resistance, Ohm Sec. 38 Low word
Fault Resistance, Ohm Sec. 39 High word
Fault Reactance, Ohm Sec. 40 ms since fault (-1 = no fault)
Fault Reactance, Ohm Sec. 41 Low word
Fault Reactance, Ohm Sec. 42 High word
Distance to fault in km 43 ms since fault (-1 = no fault)
Distance to fault in km 44 Low word
Distance to fault in km 45 High word
Distance to fault in % 46 ms since fault (-1 = no fault)
Distance to fault in % 47 Low word
Distance to fault in % 48 High word
Real-Time Device Data Stored in PLC (7SA511) (Continued)
Function Register Location in
PLC Block
1
Range or Contents
- DTU3005-B 1
- Table of Contents 3
- 1 Introduction 5
- 2 Installing the Software 10
- 3 Starting the Software 12
- 4.1 Application Description 16
- 4.3 PLC Setup—Port 1 17
- 4.4 Device Setup—Port 2 19
- 4.5 Passthrough Setup—Port 3 20
- 4.6 Device List Setup 21
- Registers 23
- Registers by Device 25
- 4.9 Global Command Registers 29
- 4.11 Device Command Registers 30
- 4.12 Saving the Project File 31
- Master to Devices 32
- 5.3 Modbus Setup—Port 1 34
- Communications Settings 35
- Response Time-Out 35
- 5.4 Device Setup—Port 2 36
- Modbus Master 37
- Intermessage Time-Out 38
- 5.6 Device List Setup 39
- 5.9 Global Command Registers 47
- 5.11 Device Command Registers 48
- 5.12 Saving the Project File 48
- Port Expander 49
- 6.1 Passthrough Setup—Port 1 50
- 6.3 Passthrough Setup—Port 3 52
- 7 Transferring Project Files 53
- 8 Setting Options 56
- Appendix A: Supported PLCs 62
- Appendix B: Supported Devices 66
- C Installing the Hardware 67
- C.3 Connector Pinouts 68
- D Cable Connection Diagrams 69
- DB-25 Male 70
- DB-15 Male 70
- Mini DIN 71
- DTU 3005B 72
- Koyo 205 72
- Koyo 305 72
- Koyo 405 73
- Mitsubishi 73
- DB-9 Male 74
- T Series 80
- EDevice Data Format 81
- –23 For Future Expansion 82
- –25 For Future Expansion 89
- Range or Contents 90
- E.7 Device Type: SB-TL 91
- E.9 Device Type: ISGS 93
- ISGS Operator’s Manual 94
- E.11 Device Type: S7-I/O 97
- E.12 Device Type: 7SA511 98
- E.13 Device Type: 7SA513 103
- E.14 Device Type: 7SD511 109
- E.15 Device Type: 7SD512 112
- E.16 Device Type: 7SJ511 115
- E.17 Device Type: 7SJ512 118
- E.18 Device Type: 7SJ531 122
- E.19 Device Type: 7SJ600 128
- E.20 Device Type: 7UT512 131
- E.21 Device Type: 7UT513 134
- F Diagnostic Data Format 138
- Appendix G: Warranty 139
Produits connexes et manuels pour Mise en réseau Siemens DTU3005-B
Mise en réseau Siemens MC35 Spécifications
(42 pages)
(42 pages)
(183 pages)
Mise en réseau Siemens SE505 Spécifications
(135 pages)
(135 pages)
Mise en réseau Siemens SPC3 Spécifications
(38 pages)
(38 pages)
© 2020, manymanuals.fr. Tous droits réservés | 0.077 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels