Siemens DTU3005-B Manuel de l'opérateur télécharger pdf (Page 34)

5 Creating Project Files—Modbus Master to Devices

30 Siemens Energy & Automation, Inc.

5.3 Modbus Setup—Port 1

You must have a Modbus Master to Devices project

file open to configure port 1 using the instructions in

this section. Select Port 1 (Modbus Master) from the

Edit menu, and the Port 1 Modbus Master configura-

tion screen appears.

To select the protocol for the Modbus Master device

connected to port 1, highlight Modbus Protocol and

press Enter. The Modbus Master Protocol selection

menu appears:

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 140 141

DTU3005-B 1
Table of Contents 3
1 Introduction 5
2 Installing the Software 10
3 Starting the Software 12
4.1 Application Description 16
4.3 PLC Setup—Port 1 17
4.4 Device Setup—Port 2 19
4.5 Passthrough Setup—Port 3 20
4.6 Device List Setup 21
Registers 23
Registers by Device 25
4.9 Global Command Registers 29
4.11 Device Command Registers 30
4.12 Saving the Project File 31
Master to Devices 32
5.3 Modbus Setup—Port 1 34
Communications Settings 35
Response Time-Out 35
5.4 Device Setup—Port 2 36
Modbus Master 37
Intermessage Time-Out 38
5.6 Device List Setup 39
5.9 Global Command Registers 47
5.11 Device Command Registers 48
5.12 Saving the Project File 48
Port Expander 49
6.1 Passthrough Setup—Port 1 50
6.3 Passthrough Setup—Port 3 52
7 Transferring Project Files 53
8 Setting Options 56
Appendix A: Supported PLCs 62
Appendix B: Supported Devices 66
C Installing the Hardware 67
C.3 Connector Pinouts 68
D Cable Connection Diagrams 69
DB-25 Male 70
DB-15 Male 70
Mini DIN 71
DTU 3005B 72
Koyo 205 72
Koyo 305 72
Koyo 405 73
Mitsubishi 73
DB-9 Male 74
T Series 80
EDevice Data Format 81
–23 For Future Expansion 82
–25 For Future Expansion 89
Range or Contents 90
E.7 Device Type: SB-TL 91
E.9 Device Type: ISGS 93
ISGS Operator’s Manual 94
E.11 Device Type: S7-I/O 97
E.12 Device Type: 7SA511 98
E.13 Device Type: 7SA513 103
E.14 Device Type: 7SD511 109
E.15 Device Type: 7SD512 112
E.16 Device Type: 7SJ511 115
E.17 Device Type: 7SJ512 118
E.18 Device Type: 7SJ531 122
E.19 Device Type: 7SJ600 128
E.20 Device Type: 7UT512 131
E.21 Device Type: 7UT513 134
F Diagnostic Data Format 138
Appendix G: Warranty 139

Commentaires sur ces manuels

Pas de commentaire

Siemens DTU3005-B Manuel de l'opérateur Page 34

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Siemens DTU3005-B