Siemens TC63 Manuel d'utilisateur télécharger pdf (Page 408)

TC63 AT Command Set

17.10 AT^SPBS

TC63_ATC_V00.490 Page 408 of 501 5/24/05

Confidential / Draft - Do not copy

After a write command has terminated successfully with "OK", the value from

parameter <index-a> is saved and retained as the new <internal-

counter> value.

Mind after the last record of phonebook, the first entry follows.

1...maxindex The index in the sorted list of phonebook entries that identifies the second entry

displayed.

<index-b>= (<index-a>+1).

Mind after the last record of phonebook, the first entry follows.

1...maxindex The index in the sorted list of phonebook entries that identifies the third entry

displayed.

<index-c>= (<index-b>+1).

Mind after the last record of phonebook, the first entry follows.

String type phone number in format specified by <type>.

the number parameter may be an empty string.

Type of address octet, which defines the used type of number (ton) and the numbering plan identification (npi).

Please consider that for types other than 129 or 145 dialing from phonebook with ATD><mem><n> is, depending

on the network, not always possible (refer to GSM 04.08 subclause 10.5.4.7 for details). See also <type> of

AT+CPBW.

Possible values are:

145 Dialing string <number> includes international access code character '+'

161 National number. Network support of this type is optional.

209 Dialing string <number> has been saved as ASCII string and includes non-

digit characters other than "*", "#" or "+". Note that phonebook entries saved

with this type cannot be dialed.

255 Dialing string <number> is a command to control a Supplementary Service,

i.e. "*", "#" codes are contained. Network support of this type is optional.

129 Otherwise

Text assigned to the phone number.

Is a display of the "real" <location> of the entry required?

[0] Do not show an entry's "real" location number. Parameter <location> will not

be displayed

1 Show the "real" location number as parameter <location> at the end of the

entry

The location within phonebook memory at which the corresponding entry is located.

This location may be used for other phonebook commands (e.g. AT+CPBR, AT+CPBW, ATD><mem><n>).

<index-b>

(num)

<index-c>

(num)

(str)

<type>

(num)

<text>

(str)(+CSCS)

(num)

(num)

1 2 ... 403 404 405 406 407 408 409 410 411 412 413 ... 500 501

Commentaires sur ces manuels

Pas de commentaire

Siemens TC63 Manuel d'utilisateur Page 408

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Siemens TC63