Siemens TC63 Manuel d'utilisateur télécharger pdf (Page 369)

100

101

TC63 AT Command Set

14.3 AT^SCKS

TC63_ATC_V00.490 Page 369 of 501 5/24/05

Confidential / Draft - Do not copy

0 Card holder tray removed or SIM connection error

1 SIM inserted(refer to note)

2 The SIM interface HW has been deactivated to prevent possible damage (e.g.

if a SIM with invalid or unsupported electrical specifications has been

detected).

The SIM interface can be reactivated only with a restart of the module, e.g. with

"AT+CFUN= n,1".

If the Remote SIM Access feature is activated (refer to AT^SRSA) and a SIM

card error occurs while accessing the remote SIM, the TC63 switches to its

local SIM, if any. If the SIM card error occurs while local SIM access, use of the

remote SIM is still possible.

Note

• <SimStatus> reflects the status of the SIM and the card holder tray. Therefore if an empty SIM card tray is

inserted, two URCs will be presented, indicating the status 1 followed by 0, i.e. a SIM is inserted into the card

holder tray but no SIM connection could be established.

If Remote SIM Access switches back from remote to local SIM, SCKS indicates the status 1 regardless of the

real SIM status. If no SIM is inserted this is followed by a second SCKS URC indicating 0.

Example

Now, after inserting an empty card tray the following URCs appear:

(num)(&V)

AT^SCKS=1

Activates the presentation of unsolicited result codes

^SCKS: 1

Tray connected

^SCKS: 0

No SIM card found

1 2 ... 364 365 366 367 368 369 370 371 372 373 374 ... 500 501

Commentaires sur ces manuels

Pas de commentaire

Siemens TC63 Manuel d'utilisateur Page 369

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Siemens TC63