Siemens TC63 Manuel d'utilisateur télécharger pdf (Page 435)

100

101

TC63 AT Command Set

18.19 AT^SRTC

TC63_ATC_V00.490 Page 435 of 501 5/24/05

Confidential / Draft - Do not copy

Parameter Description

Type of ring tone. You have a choice of 7 different ring tones and melodies. All will be played from the audio

output selected with the AT^SNFS command. <type>=0 is only intended for muting.

0 Mutes the currently played tone immediately.

1 Sequence 1

2 Sequence 2

(D)

Sequence 3

4 Sequence 4

5 Sequence 5

6 Sequence 6

7 Sequence 7

Volume of ring tone, varies from low to high

(D)

Mute

1Very low

2 Identical with 1

3Low

4 Identical with 3

5Middle

6 Identical with 5

7 High

Status of test ringing. Indicates whether or not a melody is currently being played back for testing

0 Switched off

1 Switched on

Notes

• Before first using ring tones note that the following settings apply:

We have chosen to let you decide your own preferences when you start using ring tones. Therefore, factory

setting is AT^SRTC=3,0,0 (ring tones are muted). To activate ring tones for the very first time, first enter the

write command and simply change the volume. After applying a firmware update the volume and type

selected before the firmware update will be preserved.

• The test ringing signal cannot be activated while an MTC is ringing (ERROR).

• If an MTC arrives during test playback, test ringing will be deactivated and "normal" ringing reactivated

(RING). Likewise, an MOC will also stop test ringing.

• If no optional parameter is entered, the old value will be kept.

<type>

(num)

(num)

(num)

1 2 ... 430 431 432 433 434 435 436 437 438 439 440 ... 500 501

Commentaires sur ces manuels

Pas de commentaire

Siemens TC63 Manuel d'utilisateur Page 435

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Siemens TC63