Siemens TC63 Manuel d'utilisateur télécharger pdf (Page 141)

100

101

TC63 AT Command Set

7.2 ATA

TC63_ATC_V00.490 Page 141 of 501 5/24/05

Confidential / Draft - Do not copy

7.2 ATA Answer a call

Syntax

Command Description

TA causes remote station to go off-hook (e.g. answer call).

Parameter Description

Connection status

<text> output only if ATX parameter setting with value greater 0.

Notes

• Any additional commands on the same command line are ignored.

• The command may be aborted generally by receiving a character during execution. It can't be aborted in

some connection setup states, such as handshaking.

• If AT+FCLASS setting is 1 or 2, all incoming calls will be answered as fax calls, when ATA is issued on multi-

plexer channel 1 resp. ASC0. For calls explicitly signalled as voice or data calls, this procedure will fail with

result code "NO CARRIER", but the call in question will continue to ring.

It is possible to change the setting for AT+FCLASS to 0 while the call is ringing, and accept the call normally

afterwards with ATA.

• The ATA command may be used also to accept a network request for a PDP context activation (see ATA).

• See also ATX for <text>.

• If an incoming call is no longer available (already disconnected/hanged up)a "NO CARRIER" result code will

be given.

Exec Command

ATA

Response(s)

In case of data call, if successfully connected (TA switches to data mode):

CONNECT <text>

In case of voice call, if successfully connected:

When TA returns to command mode after call release:

If no connection:

NO CARRIER

Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

V.250 % % % % % % % ! ! !

<text>

(str)

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 500 501

Commentaires sur ces manuels

Pas de commentaire

Siemens TC63 Manuel d'utilisateur Page 141

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Siemens TC63