Siemens TC63 Manuel d'utilisateur télécharger pdf (Page 308)

100

101

TC63 AT Command Set

11.22 Using GPRS AT commands (Examples)

TC63_ATC_V00.490 Page 308 of 501 5/24/05

Confidential / Draft - Do not copy

11.22 Using GPRS AT commands (Examples)

Examples

EXAMPLE 1

Defining and using a Context Definition ID (CID):

Every time a CID is used as a parameter for a GPRS command the CID has to be defined before by using

the AT+CGDCONT command. To get the parameter of a CID use the AT+CGDCONT read option. If the response

of 'AT+CGDCONT?' is OK only, there is no CID defined.

All parameters of the CID are initiated by NULL or not present values, and the CID itself is set to be undefined.

To define a CID use the AT+CGDCONT command with at least one CID parameter. At the moment the mobile

supports CID 1 and CID 2 by using the AT+CGDCONT command.

Define CID 1 and set the PDP type to IP, access point name and IP address are not set:

Define CID 2 and sets PDP type, APN and IP addr:

A following read command will respond:

Set the CID 1 to be undefined:

A following read command will respond:

AT+CGDCONT?

There is no CID defined

AT+CGDCONT=1,"IP"

AT+CGDCONT=2,"IP", "internet.t-d1.gprs", 111.222.123.234

AT+CGDCONT?

+CGDCONT:1,"IP","","",0,0

+CGDCONT:2,"IP","internet.t-d1.gprs",111.222.123.234

AT+CGDCONT=1

AT+CGDCONT?

+CGDCONT:2,"IP","internet.t-d1.gprs",111.222.123.234

1 2 ... 303 304 305 306 307 308 309 310 311 312 313 ... 500 501

Commentaires sur ces manuels

Pas de commentaire

Siemens TC63 Manuel d'utilisateur Page 308

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Siemens TC63