Siemens TC63 Manuel d'utilisateur télécharger pdf (Page 379)

100

101

TC63 AT Command Set

15.1 AT^SRSA

TC63_ATC_V00.490 Page 379 of 501 5/24/05

Confidential / Draft - Do not copy

SAP connection state

0 No SAP connection established.

1 SAP connection ongoing, i.e. peers exchange messages.

Notes

• If AT^SRSA with <dataForm> set to 1 (SAP) is given on the same serial multiplex channel as specified with

parameter <muxChan> the SAP data transfer mode is entered immediately. Therefore no command response

is issued by the TC63 in this case.

• If the TC63 is acting as SAP client and has switched to a remote SIM it starts accessing this SIM. If during

this time AT commands are used which need access to the SIM itself (e.g. AT+CPIN?) the TC63 responds

with "+CME ERROR: SIM blocked" or "+CME ERROR: SIM busy". Retry until SIM is fully accessible in this

case.

• If the TC63 is acting as SAP server and has released its SIM to a client it considers it as not accessible. There-

fore AT commands which require SIM access will be rejected with "+CME ERROR: SIM not inserted".

• Parameters <muxChan>, <dataForm> and <beaconPer> are applicable for RSA activation only.

(num)

1 2 ... 374 375 376 377 378 379 380 381 382 383 384 ... 500 501

Commentaires sur ces manuels

Pas de commentaire

Siemens TC63 Manuel d'utilisateur Page 379

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Siemens TC63