Siemens TC63 Manuel d'utilisateur télécharger pdf (Page 226)

100

101

TC63 AT Command Set

9.10 AT+CLIR

TC63_ATC_V00.490 Page 226 of 501 5/24/05

Confidential / Draft - Do not copy

9.10 AT+CLIR Calling line identification restriction

The AT+CLIR command refers to the GSM supplementary service CLIR (Calling Line Identification Restriction).

Syntax

Parameter Description

Parameter shows the settings for outgoing calls:

[0]

(P)

Presentation indicator is used according to the subscription of the CLIR service

1 CLIR invocation

2 CLIR suppression

Parameter shows the subscriber CLIR service status in the network:

0 CLIR not provisioned

1 CLIR provisioned in permanent mode

2 Unknown (e.g. no network, etc.)

3 CLIR temporary mode presentation restricted

4 CLIR temporary mode presentation allowed

Note

• The settings made with AT+CLIR=1 or AT+CLIR=2 are used for all outgoing calls until the ME is switched off

or AT+CLIR=0 is used.

Test Command

AT+CLIR=?

Response(s)

+CLIR: (list of supported <n>s)

Read Command

AT+CLIR?

Response(s)

+CLIR<n>, <m>

ERROR

+CME ERROR: <err>

Write Command

AT+CLIR=[<n>]

Response(s)

ERROR

+CME ERROR: <err>

Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

GSM 07.07 % % % % % % % ! ! !

<n>

(num)

<m>

(num)

1 2 ... 221 222 223 224 225 226 227 228 229 230 231 ... 500 501

Commentaires sur ces manuels

Pas de commentaire

Siemens TC63 Manuel d'utilisateur Page 226

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Siemens TC63