Siemens DTU3005-B Manuel de l'opérateur télécharger pdf (Page 80)

Appendix C: Device Data Format

76 Siemens Energy & Automation, Inc.

Ext. trip via binary input:

1pole L1

102 ms since fault (-1 = no occurrence)

Ext. trip via binary input:

1pole L2

103 ms since fault (-1 = no occurrence)

Ext. trip via binary input:

1pole L3

104 ms since fault (-1 = no occurrence)

Ext. trip via binary input: 3pole 105 ms since fault (-1 = no occurrence)

Ext. trip via binary input:

Without AR

106 ms since fault (-1 = no occurrence)

Reserved 107–110 For future expansion

1. Status information for each parameter is transmitted in two bits. The status bit indicates status (true = 1, false = 0) for the parameter

and the valid bit indicates that the device has successfully updated the value in the status bit (true = 1, false = 0).

Device Command Data Retrieved From PLC (7SA511)

First Command Word (Command Word) Additional Command Words (Data or Value)

0 = No command Unused

1 = Time Sync 2nd Word: Time [ms] - (0-59999)

3rd Word: Time [h/m] - high byte: HH (1-24), low byte: MM (0-59)

4th Word: Date [m/d] - high byte: MM (1-12), low byte: DD (1-31)

5th Word: Date [y] - YY (00-99)

2 = Reset LEDs Unused

3 = Activate Parameter Set A Unused

4 = Activate Parameter Set B Unused

5 = Activate Parameter Set C Unused

6 = Activate Parameter Set D Unused

10 = General Command 2nd Word: [Typ] in high byte, [Inf] in low byte

Real-Time Device Data Stored in PLC (7SA511) (Continued)

Function Register Location in

PLC Block

Range or Contents

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 119 120

Pas de commentaire

Siemens DTU3005-B Manuel de l'opérateur Page 80