Siemens ET8 Series Instructions d'exploitation télécharger pdf (Page 49)

Additional Information CLV61x Dual Port (PROFINET IO)

7.13 Searching the network using SOPAS Auto IP Scan

The SOPAS Auto IP Scan can also be used to scan the network for SICK devices. To do so, start a new

project in SOPAS ET and call up the Network Scan Assistant:

Then enable IP communication and select the Auto IP settings:

Now you can search for SICK sensors. The search is based on MAC addresses and includes all SICK

devices (MAC address = 00 06 77 xx xx xx).

A CLV61x Dual Port is also found if the IP address is 0.0.0.0.

You can also change the IP address by double-clicking on the device.

In the case of CLV61x Dual Port, the IP address can only be adjusted if the CLV61x Dual Port is no longer

actively exchanging data with the PROFINET IO controller (PLC).

1 2 ... 44 45 46 47 48 49 50 51 52

Pas de commentaire

Siemens ET8 Series Instructions d'exploitation Page 49