Siemens ET8 Series Instructions d'exploitation télécharger pdf (Page 48)

Additional Information CLV61x Dual Port (PROFINET IO)

7.11 Checking and, if necessary, assigning a PROFINET name from the

PLC side via HW Config

You can use this tool to check the PROFINET names of the PROFINET devices.

Select the PROFINET line and start this function:

If some names are not available, a name can be assigned here.

7.12 Checking the PROFINET name using the PST (Primary Setup Tool)

Alternatively, you can use the PST tool from Siemens to scan the PROFINET devices in the network and

assign the IP addresses and device name.

1 2 ... 43 44 45 46 47 48 49 50 51 52

Pas de commentaire

Siemens ET8 Series Instructions d'exploitation Page 48