Siemens EK 746 Series Instructions d'exploitation télécharger pdf (Page 28)

Mounting

5.4 Mounting with mounting plate

SCALANCE W786 outdoor access point

28 Operating Instructions, 06/2013, A5E02280428-08

5.4.2

Screwing the cover plate for the cable feedthrough to the mounting plate

Protection of the cable feedthrough against strong water jets

The cabling of a SCALANCE W786 is led out of the rear of the device. The housing seal is

effective only when it is not subjected to water jets. If the device is mounted on a wall, this is

the case and no further measures are necessary. When mounted in any other way, except

for mounting on an S7-300 standard rail, an additional cover plate must be screwed to the

mounting plate.

WARNING

Danger from line voltage

If the cable feedthrough is subjected to strong water jets, water can penetrate the device

and create a live connection to the line voltage. There is then a risk of electric shock.

Make sure that you use the cover plate for the cable feedthrough if you do not mount the

SCALANCE W786 on a wall.

Procedure

Figure 5-9 Fitting and securing the cover plate for the cable feedthrough

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 89 90

Pas de commentaire

Siemens EK 746 Series Instructions d'exploitation Page 28