Siemens EK 746 Series Instructions d'exploitation Page 20

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 90
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 19
Mounting
5.1 Removing / fitting the housing cover
SCALANCE W786 outdoor access point
20 Operating Instructions, 06/2013, A5E02280428-08
Figure 5-1 Removing the cover
A Sealing cap
B Cover screw
C Housing cover
Follow the steps below to remove the housing cover:
1. Remove the sealing caps from the housing cover (position
A
in the figure above)
2. Loosen the screws in the cover (position
B
in the figure above).
3. Remove the housing cover (position
C
in the figure above).
Fitting the housing cover
Fitting the housing cover is carried out in the reverse order. Tightening torque for the cover
screws 1.8 Nm.
Vue de la page 19
1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 89 90

Commentaires sur ces manuels

Pas de commentaire