
Description
4.2 LED display
SCALANCE W786 outdoor access point
Operating Instructions, 06/2013, A5E02280428-08
15
Green flashing
quickly
Access Point Mode:
With 802.11h, the channel is scanned for one minute for primary users
before the channel can be used for data traffic.
Client Mode:
The LED is always off because the 2nd port is not available in client
PRESET function completed successfully.
R3 Yellow
Access Point Mode:
Data transfer over the third WLAN port.
Client Mode:
The LED is always off because the 3rd port is not available in client
Green
Access Point Mode:
The WLAN interface is initialized and ready for operation.
Client Mode:
The LED is always off because the 3rd port is not available in client
Flashing green
Access Point Mode:
The channels are being scanned.
Client Mode:
The LED is always off because the 3rd port is not available in client
Green flashing
quickly
Access Point Mode:
With 802.11h, the channel is scanned for one minute for primary users
before the channel can be used for data traffic.
Client Mode:
The LED is always off because the 3rd port is not available in client
PRESET function completed successfully.
F
An error occurred during operation with the SCALANCE W786.
Flashing red Ready to load firmware. The device was either stopped with the reset
button or there is incorrect firmware on the device.
Flashing red,
R1, R2 or R3
flashing green at
the same time
A primary user was found on all enabled channels.
Commentaires sur ces manuels