Siemens MC55 Manuel d'utilisateur télécharger pdf (Page 371)

100

101

MC55 AT Command Set

15.2 AT+CPBR

obil

MC55_ATC_V01.05 Page 371 of 469 2/10/04

Confidential / Released

15.2 AT+CPBR Read from Phonebook

This command serves to read one or more entries from the phonebook selected with AT command AT+CPBS.

It can be used only after the phonebook's data has been read from the SIM successfully. Reading starts after

successful SIM authentication has been performed and may take up to 30 seconds depending on the SIM used.

While this read process is in progress, an attempt to use any of the phonebook commands will result in "+CME

Error: SIM busy".

Syntax

Command Description

The test command returns the location range supported by the current phonebook storage, the maximum length

<number> field and the maximum length of <text> field. Note: Length information may not be available while

SIM storage is selected. If storage does not offer format information, the format list contains empty parenthe-

sizes.

The write command determines the phonebook entry to be displayed with

<location1> or a location range

from

<location1> to <location2>. Hence, if no <location2> is given only the entry at <location1> will

be displayed.

If no entries are found at the selected location "OK" will be returned.

Test Command

AT+CPBR=?

Response(s)

+CPBR: (1-<maxloc>), <nlength>, <tlength>

+CME ERROR

Write Command

AT+CPBR=<location1>[, <location2>]

Response(s)

[+CPBR: <location1>, <number>, <type>, <text> ]

[+CPBR: <location2>, <number>, <type>, <text> ]

+CME ERROR

PIN ASC0 ASC1 MUX1 MUX2 MUX3

% % % % % %

Reference(s)

GSM 07.07, GSM 11.11

1 2 ... 366 367 368 369 370 371 372 373 374 375 376 ... 468 469

Commentaires sur ces manuels

Pas de commentaire

Siemens MC55 Manuel d'utilisateur Page 371

Commentaires sur ces manuels

Produits connexes et manuels pour Téléphones Siemens MC55