Siemens MC55 Manuel d'utilisateur Page 363
- Page / 469
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
MC55 AT Command Set
14.1 AT^SSTA
s
m
obil
e
MC55_ATC_V01.05 Page 363 of 469 2/10/04
Confidential / Released
Command Description
The read command can be used to request the current operating status and the used alphabet of the Remote-
SAT interface.
The write command is used to activate the AT command interface of the SIM Application Toolkit in the MC55 and
needs to be issued after every power on. However, removing and inserting the SIM does not affect the activation
status.
SAT commands which are not using the AT interface (non MMI related SAT commands , e.g. PROVIDE LOCAL
INFORMATION) could be executed without activating Remote-SAT.
Parameter Description
MC55 Remote-SAT interface states
0 RESET
1OFF
2IDLE
3PAC
4WAIT
0 GSM character set
Input of a character requests one byte, e.g. "Y".
1 UCS2
To display the 16 bit value of characters represented in UCS2 alphabet a 4 byte
string is required, e.g. "0059" is coding the character "Y". For details please
refer to ISO/IEC 10646.
0 SAT is already used on another instance (logical channel in case of the multi-
plex protocol). Only test and read commands can be used.
1 SAT may be started on this instance via the write version of this command.
SAT profile according to GSM 11.14 [19].
The profile tells the SIM Application which features (e.g. proactive commands) are supported by the SIM Appli-
cation Toolkit implementation of the MC55.
1Activate Remote-SAT
Note
• To limit the time Remote-SAT is kept in states PAC or WAIT any ongoing (but unanswered) Proactive Com-
mand is automatically aborted after 10 minutes with Terminal Response "ME currently unable to process com-
mand" or "No response from user" if applicable. An URC "Terminate Proactive Command" will be send to the
external application in this case, too.
<state>
(num)
<Alphabet>
(num)
<allowedInstance>
(num)
<SatProfile>
(str)
<mode>
(num)
- Siemens Cellular Engine 1
- Version: 01.05 1
- DocId: MC55_ATC_V01.05 1
- Contents 3
- MC55 AT Command Set 10
- List of Tables 11
- List of Figures 12
- 1. Introduction 13
- 1.2 Related documents 14
- 1.3 Document conventions 15
- 1.3.1 Quick reference table 15
- 1.4 AT command syntax 17
- 1.4.1 Using parameters 17
- 1.5 Supported character sets 19
- 1.6 Flow Control 26
- 1.9 Errors and Messages 29
- 2. Configuration Commands 30
- 2.2.1 AT&V responses 31
- 3. Status Control Commands 63
- 3.2 AT+CIND Indicator control 66
- 4.1 AT\Q Flowcontrol 89
- 4.5 ATE Enable command echo 93
- 4.7.1 Autobauding 98
- 5. Security Commands 103
- 5.2 AT+CPIN2 Enter PIN2 107
- 5.4 AT+CLCK Facility lock 115
- 5.5 AT^SLCK Facility lock 121
- 5.6 AT+CPWD Change Password 122
- 5.7 AT^SPWD Change Password 126
- 6. Identification Commands 127
- 7. Call related Commands 137
- 7.2 ATA Answer a call 139
- 7.10 AT+CHUP Hang up call 152
- 7.16 ATP Select pulse dialing 159
- 7.19 ATT Select tone dialing 162
- 8. Network Service Commands 186
- 8.4 AT+CSQ Signal quality 193
- 8.5 AT^SMONC Cell Monitoring 195
- 8.6.1 AT^MONI responses 198
- 8.6.2 Service states 199
- 8.6.3 Notes 199
- 8.7.1 AT^MONP responses 202
- 8.8 AT^SMONG GPRS Monitor 203
- 8.10 AT^SHOM Display Homezone 207
- 9.5 AT+CCUG Closed User Group 220
- 9.7 AT+CCWA Call Waiting 226
- 10. GPRS Commands 243
- 11. FAX Commands 281
- 11.23 AT+FRM Receive Data 306
- 11.24 AT+FRS Receive Silence 307
- 11.26 AT+FTM Transmit Data 309
- 12.1 SMS parameters 312
- 12.7 AT+CMGS Send SMS message 323
- 13. SIM related Commands 356
- 14.2 ^SSTN SAT Notification 364
- 14.4 AT^SSTR SAT Response 368
- 15. Phonebook Commands 370
- 16. Audio Commands 392
- 16.5 AT+CMUT Mute control 397
- 16.6 AT+VTD Tone duration 398
- 17. Hardware related Commands 425
- 17.2 AT+CCLK Real Time Clock 429
- 18. Miscellaneous Commands 439
- 19. Appendix 443
- 19.2 List of *# Codes 444
Produits connexes et manuels pour Téléphones Siemens MC55
(76 pages)
Téléphones Siemens T25 Manuel d'utilisateur
(41 pages)
(41 pages)
(2 pages)
Téléphones Siemens A400A Spécifications
(11 pages)
(11 pages)
(93 pages)
(48 pages)
© 2020, manymanuals.fr. Tous droits réservés | 0.973 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels