Siemens MC55 Manuel d'utilisateur télécharger pdf (Page 316)

100

101

MC55 AT Command Set

12.2 AT+CMGC

obil

MC55_ATC_V01.05 Page 316 of 469 2/10/04

Confidential / Released

12.2 AT+CMGC Send an SMS command

Syntax

Notes

• After invoking the commands AT+CMGW, AT+CMGS or AT+CMGC it is necessary to wait for the prompt ">"

before entering text or PDU. After the prompt a timer will be started to observe the input.

• At baudrates below 19200 it is recommended to use the line termination character only (refer to

ATS3, default

<CR>) before entering the text or PDU. Use of the line termination character followed by the response format-

ting character (refer to

ATS4, default <LF> can cause problems

Test Command

AT+CMGC=?

Response(s)

Write Command

If text mode (see AT+CMGF=1)

AT+CMGC=<fo>, <ct> [, <pid>[, <mn>[, <da>[, <toda>]]]] <CR> Text can be entered <CTRL-Z>/<ESC>

Response(s)

+CMGC: <mr>[, <scts>]

If sending fails

ERROR

+CMS ERROR

Write Command

If PDU mode (see AT+CMGF=0)

AT+CMGC=<length> <CR> PDU can be entered <CTRL-Z>/<ESC>

Response(s)

+CMGC: <mr>[, <ackpdu>]

If sending fails

ERROR

+CMS ERROR

PIN ASC0 ASC1 MUX1 MUX2 MUX3

% % % % % %

Reference(s)

GSM 07.05

1 2 ... 311 312 313 314 315 316 317 318 319 320 321 ... 468 469

Commentaires sur ces manuels

Pas de commentaire

Siemens MC55 Manuel d'utilisateur Page 316

Commentaires sur ces manuels

Produits connexes et manuels pour Téléphones Siemens MC55