Siemens MC55 Manuel d'utilisateur télécharger pdf (Page 125)

100

101

MC55 AT Command Set

5.6 AT+CPWD

obil

MC55_ATC_V01.05 Page 125 of 469 2/10/04

Confidential / Released

EXAMPLE 2

To set password used to enable or disable barring of all outgoing calls:

EXAMPLE 3

Handling of the "PS" lock password

EXAMPLE 4

To specify a new "PS" lock password, after the old password was disabled (e.g. after three failed attempts to

change the "PS" password): use the master phone code.

CAUTION: THIS TEST SHOULD BE PERFORMED ONLY IF THE CORRECT MASTER PHONE CODE FOR

THE INDIVIDUAL ME USED IS DEFINITELY AVAILABLE! Otherwise the module used will be rendered use-

less until the correct master phone code is entered!:

Alternatively, without giving a new password:

AT+CPWD="AO","0000","3333"

Requests the network to change the password for

supplementary service "call barring".

Ususally this request will affect all barring services,

even though the request is issued for Supplementary

Service BAOC ("Barring of all outgoing calls") only.

Refer to the respective network provider for detail.

AT+CMEE=2

Enable text output of CME Error information

AT+CPWD="PS","1111","2222"

(where "1111" = old password and "2222" = new

password)

Password for facility "PS" is now "2222"

AT+CPWD="PS","1111","2222"

Repeat command to provoke error "incorrect pass-

word"

+CME ERROR: incorrect password

("1111" is no longer the correct password)

AT+CPWD="PS","12345678","1111"

where 12345678 is the Master Phone Code and

1111 is the new password. You may also use

<new

password>

to restore the former disabled pass-

word.

AT+CPWD="PS","12345678"

(where 12345678 is the Master Phone Code). Deac-

tivates the present phone lock.

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 468 469

Commentaires sur ces manuels

Pas de commentaire

Siemens MC55 Manuel d'utilisateur Page 125

Commentaires sur ces manuels

Produits connexes et manuels pour Téléphones Siemens MC55