Siemens S7 Manuel d'utilisateur télécharger pdf (Page 62)

Installing and Starting the Ethernet CP with STEP 7

SIMATIC NET NCM S7 for Industrial Ethernet

C79000-G8976-C129–06

Figure 2-7 Selecting the Subnet Type for “Other Station” (Example)

3. Select a subnet.

Result: The “Properties – Ethernet Interface” dialog is displayed. Here, you can

select the subnet, connect the station to the network and set the address (MAC,

IP). All the SIMATIC stations in the project can establish communication

relationships to this substitute object.

The addresses (MAP/IP) configured for the substitute object here must also be set

on the station using the appropriate tool, for example COM 1430.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 221 222

Pas de commentaire

Siemens S7 Manuel d'utilisateur Page 62