Siemens COM32 Guide de l'utilisateur télécharger pdf (Page 38)

Configuring ION Setup ION Setup User Guide

Applying Security

NOTE

You can only create users in Power User startup mode and cannot switch to other modes if non-default

users exist in ION Setup. If you create a user in another mode, ION Setup switches to Power User

mode. The default user is supervisor (username) and 0 (password). See “Starting ION Setup” on

page 22 for information startup modes.

ION Setup software provides a four-level security access system. Supervisor-level

personnel can control access and define which functions are available to each user

by grouping the users according to security level, as follows:

 Supervisor: This level is for management or supervisory personnel. It permits

access to all device configuration functions, including the security list, system/

network configuration, and data display functions.

 Operator: This level is for high level system operators. This permits access to

system configuration and data display functions. Operators should be well

trained in operating ION Setup.

 Controller: This level allows a controller to display data but not to change

configuration of ION Setup or of meters. This level also allows a controller to

operate triggers.

 Users: This is suitable for personnel that use ION Setup on a regular basis and

who inform Supervisors or Operators of alarm conditions.

NOTE

ION Setup supports a maximum of 50 users.

For meter-specific security information, see the description of the Setup Assistant’s

“Security Screen” on page 78. For detailed information, see the ION System

Security technical note available from the website.

Creating or modifying ION Setup user accounts

This function is only available to Supervisor-level personnel.

1. In the Network Viewer, select Tools > Options (or click ).

The options dialog box appears.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 125 126

Pas de commentaire

Siemens COM32 Guide de l'utilisateur Page 38