Siemens FS-250 Spécifications télécharger pdf (Page 26)

FS-250 Installation and Operation Manual

INSTALLATION

The enclosures must be fastened securely to a clean, dry, shock-free, and vibration-free

surface. Consider the following when mounting the box.

Mounting height for visual and manual access to the Display Board

Weight and size of backbox

Local mounting codes

When mounting the backbox, position the backbox clear of obstructions so that the door

can open freely and so that indicators and controls are easily accessible.

The fire alarm control panel must be mounted in a properly accessible location as required

by applicable codes. Any auxiliary battery box or other accessory not connected through a

protective device or a circuit designed for remote connection must be within the same room

and connected through electrical conduit.

Installation is to be done only by qualified personnel who have thoroughly read and

understood these instructions. The fire alarm control panel must be mounted in a properly

accessible location as required by applicable codes.

ENCLOSURE MOUNTING

The backbox must be fastened securely to a clean, dry, shock-free, and vibration-free

surface.

Consider the following before mounting the backbox.

• Mounting height for visual and manual access to the Display Panel

• Weight and size of backbox

• Local mounting codes

Install the backbox:

• Select a clean, dry, shock and vibration free surface.

• Position the backbox clear of obstructions so that the front door opens freely and the

controls and indicators are easily accessible.

• Mark the locations of the two upper mounting bolts of the backbox on the wall.

There are two key-shaped cutouts on the top of the backbox. Make sure the end with the

two key-shaped cutouts is on top when installing the backbox.

• Drill the two holes located in the previous step and screw in the top bolts, leaving a

small gap between the wall and each top bolt.

The screw type and length must be able to support the control panel, options and battery

set. You may need a different screw type, depending on the wall material.

Technical Manuals Online! - http://www.tech-man.com

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 67 68

Pas de commentaire

Siemens FS-250 Spécifications Page 26