Siemens SINUMERIK 802D sl Manuel de service télécharger pdf (Page 53)

Manual machining

5.3 Manual machining with machining types

Manual Machine Plus Turning

Programming and Operating Manual, 06/2009, 6FC5398-6CP10-1BA0

Parameter

Parameter Description

Xc This input value describes the position of the circle center in the X axis. The input

value is evaluated as absolute position (in the diameter).

Zc This input value describes the position of the circle center in the Z axis. The input

value is evaluated as absolute position.

R This input value describes the radius to be traversed.

α This input value describes the opening angle of the radius to be traversed.

Counterclockwise/Clockwise This toggle field selects whether a circle must be traversed in the clockwise or

counterclockwise direction.

5.3.3.3 Radius turning type C

For the radius turning type C, the radius to be machined is specified by the center, the end

point and the machining direction.

Figure 5-17 Radius turning type C

Parameter

Parameter Description

Xf This input value describes the position of the circle end point in the X axis. The input

value is evaluated as absolute position (in the diameter).

Zf This input value describes the position of the circle end point in the Z axis. The input

value is evaluated as absolute position.

Xc This input value describes the position of the circle center in the X axis. The input

value is evaluated as absolute position (in the diameter).

Zc This input value describes the position of the circle center in the Z axis. The input

value is evaluated as absolute position.

Counterclockwise/Clockwise This toggle field selects whether a circle must be traversed in the clockwise or

counterclockwise direction.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 129 130

Pas de commentaire

Siemens SINUMERIK 802D sl Manuel de service Page 53