Siemens SINUMERIK 802D sl Manuel de service télécharger pdf (Page 41)

Manual machining

5.2 Display and operator control optios in the main screen for "Manual Machine Plus"

Manual Machine Plus Turning

Programming and Operating Manual, 06/2009, 6FC5398-6CP10-1BA0

5.2.6 Tool change

Functionality

A basic differentiation must be made between a manual and an automatic tool-changer

system.

For an automatic system, the tool change is controlled by the PLC user program. The

currently loaded tool is displayed in the "Manual Machine Plus" main screen.

For a manual system, the required tool number is manually entered from an input screen

form.

Figure 5-5 Extract from main screen "Manual Machine Plus", entry of tool number

Operating sequences

Follow the sequence of operations below to enter the required tool number:

1. Move the cursor onto the input field for the T value.

2. Enter the tool number using the numeric keys

(the tool you wish to select must be set up in the tool list!).

3. Accept the tool number by pressing the <INPUT> key.

The following information text with the corresponding tool number is displayed:

Figure 5-6 Tool change with NC Start

Acknowledge this information text using the "Cancel" softkey.

;

$ERUW

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 129 130

Pas de commentaire

Siemens SINUMERIK 802D sl Manuel de service Page 41