Siemens SPCK620 Guide de l'utilisateur télécharger pdf (Page 22)

Multi area view

Automatic Calendar Setting

Siemens AB

A6V10271018

Security Products

26.09.2011

2. Press .

3. Scroll using the ▲ ▼ keys until the required area is visible.

4. Press the softkey below the blinking fault symbol.

NOTICE

There is a fixed soft key assignment to set / partset / unset areas or area groups.

Due to this the location of the fault icon can vary. In the above picture, there is a

fault in unset condition.

5. In the next screen, the fault(s) will be listed.

There are 2 fault symbols possible:

Fault can not be restored. Fault condition still present. Please contact your installer.

Fault can be restored.

 If the fault can be restored, press the softkey below the symbol .

 The fault is restored.

 Ready will be shown on the display.

6.5 Automatic Calendar Setting

A calendar may be assigned to an area to control setting and unsetting. When an

area is unset, you will hear an audible beep from the keypad. A warning time is

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 42 43

Pas de commentaire

Siemens SPCK620 Guide de l'utilisateur Page 22