Siemens SPCK620 Guide de l'utilisateur télécharger pdf (Page 15)

Single area view

Restoring an alarm

Siemens AB

A6V10271018

Security Products

26.09.2011

 In the next screen, the information will be shown.

 Following states are possible:

Symbol

Function

None

This open zone can be inhibited (forced set is possible).

This open zone can not be inhibited (no forced set possible). Please contact your

installer if symbol is still indicated after closing according zone (e.g. window).

Only available if the zone attribute Exit open is enabled.

The Entry – Exit zone is open. Zone will not prevent setting process. Zone has to be

closed at the end of the exit timer. If the zone is still open, setting will fail.

5.3 Restoring an alarm

If there is any alarm, the alarm will be displayed after login.

1. The alarm will be displayed by the blinking symbol and the blinking LED .

2. Press the softkey below the blinking alarm symbol.

NOTICE

The location of the different setting softkeys is fixed. Due to this the location of the

alarm icon can vary. In the above picture, there is an alarm in fullset condition.

 In the next screen, the alarm(s) will be listed.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 42 43

Pas de commentaire

Siemens SPCK620 Guide de l'utilisateur Page 15