Siemens EF 83P Series Manuel d'instructions télécharger pdf (Page 25)

1-15

1.3 Machine Potential Danger Explanation

1.3.1 Machine Potential Danger Zone

During machine automatically cutting, inside of the

machine is a very dangerous zone. It's because there is high

rotating speed spindle. X and Z axis moving rapidly, tool

magazine rotating to change tools, tailstock quill movement

and the coolant continually spraying to working zone. These

potential dangerous zone are all protected by safety cover to

avoid people touching directly the moving parts. The

positions marked by of the following drawing are all high

moving parts, the people operating or maintaining must be

very careful to operate in the moving area.

1)When the spindle is rotating or during automatic

machine, you must not open any protective cover

or door

2)When power is on, if entering into a danger zone is

necessary to do setting or maintenance, endure

needs to be very carefully.

Ignoring









      

            

       



this instruction will

cause serious injury or machine damage.

WARNING

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 112 113

Pas de commentaire

Siemens EF 83P Series Manuel d'instructions Page 25